KeyWordRevisedCategoryimportanceAlias (Distribution Service)FormatCFormatFUnitRecommendSampleObsoleteCommentDescriptionDescriptionJ
CUNIT11998/11/25FileCommonToolkit%-10sA10-degree'degree '-Units used in both CRVAL1 and CDELT1Physical unit used in both CRVAL1 and CDELT1. 'nm' is recommended for spectroscopy mode.第1軸が表す実際の座標値の単位であり、文字列で与えられる。空間情報の場合は 'degree'、波長情報の場合は 'nm'が推奨される。
CUNIT21998/11/25FileCommonToolkit%-10sA10-degree'degree '-Units used in both CRVAL2 and CDELT2Physical unit used in both CRVAL2 and CDELT2. 'nm' is recommended for spectroscopy mode.第2軸が表す実際の座標値の単位であり、文字列で与えられる。空間情報の場合は 'degree'、波長情報の場合は 'nm'が推奨される。
DATASET1998/12/14ObjectObjectFITS.#Inst.DATASET%-20sA20--'o98003d1021'-ID of an observation datasetID of an observation dataset観測データセットのID。この値は必要に応じて制御系から撮像、あるいはフレーム生成コマンドのパラメータとして投入される。
DATA-TYP1998/11/25ObjectCommon-%-30sA30--'BIAS '-Type / Characteristics of this dataThis keyword describe a data type/characteristics. /OBJECT/BIAS/DARK/DOMEFLAT/SKYFLAT/INSTFLAT/COMPARISON/STANDARD_STAR/...取得データの種類を記述する。/OBJECT/BIAS/DARK/DOMEFLAT/SKYFLAT/INSTFLAT/COMPARISON/STANDARD_STAR/...
DATE-OBS1998/11/25TimeCommonToolkit%-10sA10UTC-'1998-09-14'-Observation start date (yyyy-mm-dd)UTC date at the beginning of the exposure. Format : yyyy-mm-dd露出開始の時点の日時。単位はUTCで、yyyy-mm-ddの形式とする。
DEC1998/12/14ObjectCommonFITS.SBR.DEC%-12sA12--'-01:23:45.67'-DEC of pointing (+/-DD:MM:SS.SS)Declination of telescope pointing. This value is based on an EQUINOX of observer's target table. Notice that this value dose NOT show accurate field center of the instrument.望遠鏡指向位置の赤緯で、分点は項目 EQUINOX に記述されている。必ずしも観測装置の視野中心と一致する必要はない。
DEC20001998/11/25ObjectCommonToolkit%-12sA12--'+20:00:12.34'-DEC(J2000) of pointing (+/-DD:MM:SS.SS)Declination of pointing based on J2000 equinox. If telescope control system is based on the J2000, this value is equals to the value of keyword DEC. Notice that this value dose NOT show accurate field center of the instrument.分点J2000に準拠した赤緯。もし項目 EQUINOX に J2000 が用いられていれば、DEC と同じ値となる。必ずしも観測装置の視野中心と一致する必要はない。
DET-Ann1998/12/14InstrumentOptional-%20.3fF20.3degree-0.045-Relative angle of nn-th detector (deg)Angle between nn-th detector and instrument's standard line (degree)nn番目の検出器の基準線に対する相対的な取付角 (degree)
DETECTOR1998/12/10InstrumentCommon-%-20sA20--'CCD0001 '-Name of the detector/CCDName/Identification of the detector/CCD.CCD等の検出器の名称
DET-ID1998/12/10InstrumentOptional-%20dI20--2-ID of the detector used for this dataID of the detector used for this fits data. The detector can be identified by the number when the instrument equips multi detectors.複数の検出器からなる観測装置の場合、当該データを生成させた検出器(CCD)等の識別子
DET-NSMP1998/12/10InstrumentOptional-%20dI20--1-# of multi-sampling in an exposurenumber of multi-sampling in an exposure1回の露出中に複数回の読み出しを行う場合にその回数
DET-P1nn1999/03/01InstrumentOptional-%20.3fF20.3arcsec-61.875-Relative X pos of nn-th detector(arcsec)X Position of the nn-th detector center relative from the field center or instrument standard position複数個の検出器を持つ装置の場合に、装置基準位置、或いは、フィールドセンターからnn番目の検出器の中心位置までのX軸(第1軸)方向の相対位置
DET-P2nn1999/03/01InstrumentOptional-%20.3fF20.3arcsec-120.125-Relative Y pos of nn-th detector(arcsec)Y Position of the nn-th detector center relative from the field center or instrument standard position複数個の検出器を持つ装置の場合に、装置基準位置、或いは、フィールドセンターからnn番目の検出器の中心位置までのY軸(第2軸)方向の相対位置
DETPXSZ11998/12/14InstrumentOptional-%20.4fF20.4mm-0.0401-Detector pixel size in axis1 (mm)Detector pixel size in first axis (NAXIS1). Unit is mm.検出器の第1軸(NAXIS1)方向のピクセルサイズ。単位は mm。
DETPXSZ21998/12/14InstrumentOptional-%20.4fF20.4mm-0.0399-Detector pixel size in axis2 (mm)Detector pixel size in second axis (NAXIS2). Unit is mm.検出器の第2軸(NAXIS2)方向のピクセルサイズ。単位は mm。
DET-RST1998/12/14InstrumentOptional-%20dI20--2-reset number before exposureNumber of detector reset performed before exposure.露出前に検出器をリセットした回数。
DET-SMPL1998/12/14InstrumentOptional-%-20sA20--'destructive'-sampling methodSampling method of produced image.どのようなパターンでデータをサンプリングしたかを示す文字列。
DET-TAVE1998/12/14InstrumentOptional-%20.2fF20.2K-121.87-Average of the detector temperature (K)Average of the detector temparature during exposure. Unit is Kelvin (K).検出器の平均の温度。基本的には時間平均を意味している。単位はケルビン(K)。
DET-TMAX1999/03/01InstrumentOptional-%20.2fF20.2K-121.99-Max detector temperature during exp. (K)Maximum detector temperature during the exposure. Unit is Kelvin (K).露出中の検出器の最高温度。単位はケルビン(K)。
DET-TMED1999/03/01InstrumentOptional-%20.2fF20.2K-121.54-Median of the detector temperature (K)Median of the detector temperature during the exposure. Unit is Kelvin (K).露出中の検出器温度のメディアン値。単位はケルビン(K)。
DET-TMIN1999/03/01InstrumentOptional-%20.2fF20.2K-125.88-Min detector temperature during exp. (K)Minimum detector temperature during the exposure. Unit is Kelvin (K).露出中の検出器の最低温度。単位はケルビン(K)。
DET-TMP1999/03/01InstrumentCommon-%20.2fF20.2K-165.12-Detector temperature (K)Detectors' typical (representative) temperature. Unit is Kelvin (K).検出器の温度の典型的な値(代表値)。単位はケルビン(K)。
DET-Tnn1999/03/01InstrumentOptional-%20.2fF20.2K-165.13-nn-th Detector temperature (K)nn-th Detectors' typical (representative) temperature. Unit is Kelvin (K).nn番目の検出器温度の典型的な値(代表値)。単位はケルビン(K)。
DET-TSD1999/03/01InstrumentOptional-%20.2fF20.2K-0.21-Standard Dev. of the detector temp (K)Standard deviation of the detector temperature during the exposure. Unit is Kelvin (K).露出中の検出器温度の標準偏差。単位はケルビン(K)。
DET-VER1998/12/14InstrumentOptional-%-30sA30--'Ver.1-c-2'YESDetector control command script nameDetector control command script name検出器制御コマンドスクリプトの名前。
DISPAXIS1998/12/10SpectroscopySpectroscopy-%20dI20--1-Dispersion axis in frameThe number of axis (n of NAXISn) along to dispersion.スペクトルの分散方向の軸番号(NAXISnのnに対応)
DISPERSR1998/12/10SpectroscopySpectroscopy-%-20sA20--'Grizm500-6400'-Identifier of the disperser usedIdentifier (Name, grooves, etc.) of the disperser used.使用している分散素子の名前など
DOM-HEND1999/03/01EnvironmentOptionalFITS.SBR.DOM-HUM%20.1fF20.1%-5.4-Humidity in the dome at exp. end (%)Humidity measured in the dome at the exposure end. Unit is %.露出終了時のドーム内湿度。単位はパーセント(%)。
DOM-HSTR1999/03/01EnvironmentOptionalFITS.SBR.DOM-HUM%20.1fF20.1%-5.3-Humidity in the dome at exp. start (%)Humidity measured in the dome at the exposure start. Unit is %.露出開始時のドーム内湿度。単位はパーセント(%)。
DOM-HUM1999/03/01EnvironmentOptionalFITS.SBR.DOM-HUM%20.1fF20.1%-23.1-Humidity measured in the domeHumidity measured in the dome. Unit is %.ドーム内で測定した湿度。単位はパーセント(%)。
DOM-PEND1998/12/14EnvironmentOptionalFITS.SBR.DOM-PRS%20.2fF20.2hpa-645.83-Dome atm. pressure at exposure end (hpa)Atmospheric pressure in the dome at the end of the exposure. Unit is hpa.露出終了時のドーム内気圧。単位はhpa。
DOM-PRS1998/12/14EnvironmentOptionalFITS.SBR.DOM-PRS%20.2fF20.2hpa-648.21-Atmospheric pressure in the Dome (hpa)Atmospheric pressure in the Dome. Unit is hpa.露出中の典型的な時刻に測定されたドーム内での気圧。単位はhpa。
DOM-PSTR1998/12/14EnvironmentOptionalFITS.SBR.DOM-PRS%20.2fF20.2hpa-645.14-Dome Atm. pressure at exp.start (hpa)Atmospheric pressure in the dome at the start of the exposure. Unit is hpa.露出開始時のドーム内気圧。単位はhpa。
DOM-TEND1999/03/01EnvironmentOptionalFITS.SBR.DOM-TMP%20.2fF20.2K-273.16-Temp. in the dome at exp. end (K)Temperature measured in the dome/enclosure at the exposure end. Unit is Kelvin (K).露出終了時にドーム内で測定された気温。単位はケルビン(K)。
DOM-TMP1998/12/14EnvironmentOptionalFITS.SBR.DOM-TMP%20.2fF20.2K-273.39-Temperature measured in the dome (K)Temperature measured in the dome/enclosure. Unit is Kelvin (K).露出中の典型的な時刻にドーム内で測定された気温。単位はケルビン(K)。
DOM-TSTR1999/03/01EnvironmentOptionalFITS.SBR.DOM-TMP%20.2fF20.2K-273.14-Temp. in the dome at exp. start (K)Temperature measured in the dome/enclosure at the exposure start. Unit is Kelvin (K).露出開始時にドーム内で測定された気温。単位はケルビン(K)。
DOM-WEND1999/03/01EnvironmentOptionalFITS.SBR.DOM-WND%20.2fF20.2m/s-10.88-Wind vel. in dome at exp. end (m/s)Wind velocity measured in the dome/enclosure at the exposure end (m/s).露出終了時に測定したドーム内風速(m/s)。
DOM-WMAX1999/03/01EnvironmentOptional-%20.2fF20.2m/s-8.34-Max wind vel. in dome during exp. (m/s)Maximum wind velocity (m/s) measured inside of the dome/enclosure during the exposure.露出中にドーム内部で測定された最大風速。単位はm/s。
DOM-WMIN1999/03/01EnvironmentOptional-%20.2fF20.2m/s-5.22-Min wind vel. in dome during exp. (m/s)Minimum wind velocity (m/s) measured inside of the dome/enclosure during the exposure.露出中にドーム内部で測定された最小風速。単位はm/s。
DOM-WND1999/03/01EnvironmentOptionalFITS.SBR.DOM-WND%20.2fF20.2m/s-9.12-Wind velocity in the dome (m/s)Wind velocity measured in the dome/enclosure (m/s).ドーム内で測定した風速(m/s)。
DOM-WSTR1999/03/01EnvironmentOptionalFITS.SBR.DOM-WND%20.2fF20.2m/s-10.99-Wind vel. in dome at exp. end (m/s)Wind velocity measured in the dome/enclosure at the exposure start (m/s).露出開始時に測定したドーム内風速(m/s)。
EFP-MIN11999/03/01InstrumentOptional-%20dI20pixel-5-Start X pos. of effective area (pix)Start pixel position of effective data region in first axis(NAXIS1). Effective data region means the region excluding overscan region and includes the information from the sky.第1軸(NAXIS1)方向の有効領域の開始ピクセル位置。有効領域とはオーバースキャン領域を含まない、天体の情報を含む領域を指す。
EFP-MIN21999/03/01InstrumentOptional-%20dI20pixel-10-Start Y pos. of effective area (pix)Start pixel position of effective data region in second axis(NAXIS2). Effective data region means the region excluding overscan region and includes the information from the sky.第2軸(NAXIS2)方向の有効領域の開始ピクセル位置。有効領域とはオーバースキャン領域を含まない、天体の情報を含む領域を指す。
EFP-RNG11998/12/14InstrumentOptional-%20dI20pixel-1024-X Range of overscan area (pix)Range of effective data region in first axis(NAXIS1). Unit is pixel. Effective data region means the region excluding overscan region and includes the information from the sky.第1軸(NAXIS1)方向の有効領域のピクセル単位での大きさ。有効領域とはオーバースキャン領域を含まない、天体の情報を含む領域を指す。
EFP-RNG21998/12/14InstrumentOptional-%20dI20pixel-1024-Y Range of overscan area (pix)Range of effective data region in second axis(NAXIS2). Unit is pixel. Effective data region means the region excluding overscan region and includes the information from the sky.第2軸(NAXIS2)方向の有効領域のピクセル単位での大きさ。有効領域とはオーバースキャン領域を含まない、天体の情報を含む領域を指す。
END1998/11/24FITSCommonToolkit-------This keyword has no associated value. Columns 9-80 shall be filled with ASCII blanks.このキーワードは値を持たない。9-80列はASCII空白となる。
EQUINOX1999/09/28ObjectCommonFITS.SBR.EQUINOX%20.3fF20.3year-1999.123-Standard FK5 (years)Epoch of the mean equator and equinox of the coordinate system used to express the WCS mapping. (FK5).望遠鏡指向の基準となる分点。この分点を基準として、RA, DECをヘッダー中に記述する。
EXP1TIME1998/12/14TimeOptional-%20.3fF20.3sec-0.015-Exposure time of a frame(sec)'EXP1TIME' shows an integration time (sec) of each sub-exporsure. Total integration time of a frame is accumulated by this 'EXP1TIME' and 'COADD' which shows how many sub-exporsures were coadded. ('COADD' and 'EXPTIME'). (EXPTIME = EXP1TIME * COADD)各々のsub-exporsureの積分時間を記述する。単位はsec。1 frameあたりの積分時間はこのEXP1TIMEと枚数COADDの積となる。(COADD,EXPTIMEも参照)(EXPTIME = EXP1TIME * COADD)
EXP-ID1998/12/14InstrumentCommon-%-12sA12--CACE00000231-ID of the exposure this data was takenID of an exposure this data was taken. Effective for multi detectors. First 3 characters represent instrument. The 4th character is 'E'. Remaining 8 digits are sequential number. The representation of first 3 characters are the same with for FRAMEID.このデータの撮られた露出を表すID 番号。複数の検出器に対してこのID番号が使われる。最初の3文字は観測装置を表す。4文字目は常に'E'。残りの8桁の数字が通し番号を表す。最初の3文字の表記方法はFRAMEIDと同じ。
EXPTIME1998/12/14TimeCommon-%20.2fF20.2sec-1234.56-Total integration time of the frame(sec)'EXPTIME' shows an integration time [sec] of a frame. If a frame was made from some sub-exporsures, the 'EXPTIME' corresponds to the product of 'EXP1TIME' and 'COADD'. (EXPTIME = EXP1TIME * COADD)このデータの、1 frameあたりの積分時間を記述する。単位はsec。1 frameがsub-exporsureの足し合わせである場合、EXPTIMEはEXP1TIMEとCOADDの積と等しくなる。(EXPTIME = EXP1TIME * COADD)
EXTEND1998/11/24FITSCommon-BOOLEANBOOLEAN--F-Presence of FITS ExtentionIf FITS file contains extensions, the keyword EXTEND and the value T must appear in the primary header just after the last NAXISn card image. The presence of this keyword with the value T in the primary header does not require that extensions be present.FITSファイルがextentionを持つ場合は、Primary ヘッダー内にこのキーワードを記述し、値を'T'とする。記述位置は最後に記述されているNAXISnの直後である。このキーワードの記述があり、その値が'T'であっても、実際にはextensionを持たない、ということも許される。
FILTERnn1998/12/14InstrumentOptional-%-30sA30--'FILTER:R'-Filter name/IDFilter/Grism name/ID in nn-th filter wheel which is used in the exposure.nn 番目のフィルターホイールに入っている、観測に使用されたフィルターまたはグリズムの識別子。nnは2桁の整数。
FLT-Ann1998/12/14InstrumentOptional-%20.2fF20.2degree-6.12-Inclination of nn-th Filter (degree)Inclination of the nn-th filter reference to optical axis. Unit is degree. When filter surface is normal to opical axis, this value is 0.0.nn 番目のフィルターの光軸に対する角度。単位は度(degree)。0度の時に光軸とフィルター面が直交する。


最初のページ | 戻る | 次へ | 最後のページ | インデックス

コメントの送信: sukacore@naoj.org
このページは ロータス アプローチで作成しています