SIMPLE = T / Standard FITS format BITPIX = 32 / # of bits per pixel NAXIS = 4 / # of axis in data NAXIS1 = 320 / # of pixels/row NAXIS2 = 240 / # of rows NAXIS3 = 1 / # of frames NAXIS4 = 0 / # of detectors EXTEND = F / ASCII Extension Table COMMENT = ' +++++++++++++++++++ SUBARU COMMON' COMMENT = ' ------------------------- About This DATA' FRAMEID = 'COMA00102608' / Data Serial Num of COMICS A-sequence EXP-ID = 'COME00102607' / Exporsure ID OBS-ALOC= 'Observation ' / Allocation Mode COMMENT = ' ------------------------- Observation ID' OBSERVER= 'Fujiyoshi,Jeschke,Inagaki ' / Observers PROP-ID = 'o00001 ' / Proposal ID OBSERVAT= 'NAOJ ' / Observatory TELESCOP= 'Subaru ' / Telescope name INSTRUME= 'COMICS ' / Instrument INS-VER = '2001-09-29 ' / Version of the instrument DETECTOR= 'Si:As IBC-104 SG ' / Name of the detector/CCD COMMENT = ' ------------------------- Telescope Settings' FOC-POS = 'Cassegrain ' / Focus where the instrument is attached TELFOCUS= 'CS_IR ' / Focus where a beam is reachable FOC-LEN = 100000.111 / Focal length of the telescope (mm) FOC-VAL = 0.200 / Encoder value of the focus unit (mm) INSROT = 78.133 / Instrument Rotator angle (deg) INST-PA = 0.000 / Instrument Rotator P.A. (deg) AUTOGUID= 'OFF ' / Auto Guider on/off M2-TYPE = 'CS_IR ' / Type of the Secondary Mirror (Opt/IR) M2-TIP = 'CHOPPING' / 2nd Mirror tip-tilt on/off M2-ANG1 = -3.000 / 2nd Mirror Angle-1 M2-ANG2 = 3.000 / 2nd Mirror Angle-2 M2-POS1 = -4.947 / 2nd Mirror Position-1 M2-POS2 = -2.884 / 2nd Mirror Position-2 COMMENT = ' ------------------------- Size, Coordinate etc..' DETPXSZ1= 0.0500 / Detector pixel size in axis1 (mm) DETPXSZ2= 0.0500 / Detector pixel size in axis2 (mm) CDELT1 = 0.00004583 / X Scale projected on detector(#/pix) CDELT2 = 0.00004583 / Y scale projected on detector(#/pix) CTYPE1 = 'RA---TAN ' / Pixel coordinate system CTYPE2 = 'DEC--TAN ' / Pixel coordinate system CUNIT1 = 'degree ' / Units used in both CRVAL1 and CDELT1 CUNIT2 = 'degree ' / Units used in both CRVAL2 and CDELT2 CRPIX1 = 185.0 / Reference pixel in X (pixel,IMG) CRPIX2 = 115.0 / Reference pixel in Y (pixel,IMG) CRVAL1 = 50.08221250 / Physical value of the reference pixel X CRVAL2 = 29.04608333 / Physical value of the reference pixel Y PROJP1 = 0.0 / Projection type of the first axis PROJP2 = 0.0 / Projection type of the second axis PC001001= 1.00000000 / Pixel Coordinate translation matrix CD1_1 = -0.00004583 / Pixel Coordinate translation matrix PC001002= 0.00000000 / Pixel Coordinate translation matrix CD1_2 = -0.00000000 / Pixel Coordinate translation matrix PC002001= 0.00000000 / Pixel Coordinate translation matrix CD2_1 = -0.00000000 / Pixel Coordinate translation matrix PC002002= -1.00000000 / Pixel Coordinate translation matrix CD2_2 = 0.00004583 / Pixel Coordinate translation matrix BSCALE = 1.00000000 / Real=fits-value*BSCALE+BZERO BZERO = 0.00000000 / Real=fits-value*BSCALE+BZERO BUNIT = 'ADU ' / Unit of original pixel values BLANK = 0 / Value used for NULL pixels WCS-ORIG= 'comics20001209 ' / Origin of the WCS value COMMENT = ' (So far, WCS parameters may be incorrect?)' COMMENT = ' (dummy)' COMMENT = ' ------------------------- Date' TIMESYS = 'UTC ' / Time System used in the header. UTC fix. DATE-OBS= '2009-11-03' / yyyy-mm-dd UTC obs start date UT = '16:00:48.000' / HH:MM:SS.SSS Universal Time HST = '06:00:48.000' / HH:MM:SS.SSS HST ? UT1-UTC = 0.16351000 / UT1-UTC LST = '08:31:03.010' / HH:MM:SS.SSS LST MJD = 55138.66722411 / Modified Julian Date COMMENT = ' ------------------------- Object' DATA-TYP= 'OBJECT ' / Type of this data RADECSYS= 'FK5 ' / The equatorial coordinate system OBJECT = 'HD20644 ' / Target Description EQUINOX = 2000.0 / Equinox RA = '03:20:19.731' / HH:MM:SS.SSS RA pointing (given EQ) RA2000 = '03:20:19.731' / HH:MM:SS.SSS RA pointing (J2000) DEC = '+29:02:45.90' / +/-DD:MM:SS.SS DEC pointing (given EQ) DEC2000 = '+29:02:45.90' / +/-DD:MM:SS.SS DEC pointing (J2000) AZIMUTH = 294.61616 / Azimuth of telescope pointing (degree) ALTITUDE= 20.58763 / Altitude of telescope pointing(degree) AIRMASS = 2.826 / Air Mass ZD = 69.41237 / Zenith Distance SECZ = 2.844 / SEC(Zenith Distance) LONGPOLE= 180.0 / The North Pole of standard system (deg) COMMENT = ' ------------------------- COMICS Optics' OBS-MOD = 'spectroscopy ' / Observation Mode FILTER01= 'F01C10.50W6.00 ' / Filter name/ID (pre-opt filter-1) FILTER02= 'H21 ' / Filter name/ID (pre-opt filter-2) FILTER03= 'F09C12.50W1.15 ' / Filter name/ID (img-opt filter) FILTER04= 'L01L10I ' / Lens name/ID (img-opt) DISPERSR= 'G01L10L ' / Identifier of the disperser used SLIT = 'S01W000 ' / Identifier of the slit SLT-LEN = 39.600 / Length of the slit used SLT-PA = 0.0 / Slit Position Angle (degree) SLT-WID = 0.000 / Width of the slit used SLTCPIX1= 120.0 / Slit center projected on detector(pix) SLTCPIX2= 160.0 / Slit center projected on detector(pix) COMMENT = ' --- Spectroscopy only' DISPAXIS= 1 / Dispersion Axis in frame WAV-MIN = 7500.0000 / Shortest wavelen (nm) WAV-MAX = 13500.0000 / Longest wavelen (nm) WAVELEN = 10500.0000 / Central wavelen (nm) COMMENT = ' ------------------------- COMICS Detector' EXPTIME = 0.060 / 1 exposure integration time per exp(sec) DET-TMP = 7.04 / Detector temperature (K) GAIN = 350.000 / AD conversion factor (electron/ADU) PRD-MIN1= 1 / Start X pos. of partialy read out (pix) PRD-MIN2= 1 / Start Y pos. of partialy read out (pix) PRD-RNG1= 336 / X Range of partialy read out (pix) PRD-RNG2= 241 / Y Range of partialy read out (pix) BIN-FCT1= 1 / Binning factor of X axis (pixel) BIN-FCT2= 1 / Binning factor of Y axis (pixel) COMMENT = ' ------------------------- Weather Condition' WEATHER = 'Fine ' / Weather condition SEEING = 2.25 / Long integ PSF FWHM in optical (arcsec) DOM-WND = 0.10 / Wind speed in the dome (m/s) OUT-WND = 1.50 / Wind speed outside (m/s) DOM-TMP = 275.15 / Temperature measured in the dome (K) OUT-TMP = 274.45 / Temperature measured outside dome (K) DOM-HUM = 9.3 / Humidity measured in the dome OUT-HUM = 8.4 / Humidity measured outside dome DOM-PRS = 621.30 / Atmospheric pressure in the Dome (hpa) OUT-PRS = 621.30 / Atmospheric pressure outside (hpa) COMMENT = ' +++++++++++++++++++ COMICS ORIGINAL' COMMENT = ' ------------------------- Type of the data' Q_DTYPE = 'blindslit ' / type of this data spec/img/slitview COMMENT = ' ------------------------- Pre-Optics' Q_WINDOW= 'W05KBr ' / Entrance Window Q_M1MOTA= 1425 / Pulse count of 1st mir. outer frame Q_M1MOTB= 1770 / Pulse count of 1st mir. inner frame Q_GRTPOS= 23873 / Grating Position in pulse COMMENT = ' ------------------------- Temperature ' COMMENT = ' (Not yet completed)' Q_DETTPI= '3.30 ' / COMICS DETECTOR TEMP IMAGING Q_CFTPI = '7.04 ' / COMICS COLD FINGER TEMP IMAGING Q_DETTS1= '29.30 ' / COMICS DETECTOR TEMP SPEC POS-1 Q_DETTS2= '3.54 ' / COMICS DETECTOR TEMP SPEC POS-2 Q_DETTS3= '26.88 ' / COMICS DETECTOR TEMP SPEC POS-3 Q_DETTS4= '3.56 ' / COMICS DETECTOR TEMP SPEC POS-4 Q_DETTS5= '27.56 ' / COMICS DETECTOR TEMP SPEC POS-5 Q_CFTPS = '8.15 ' / COMICS COLD FINGER TEMP SPEC Q_OPTTP = '31.14 ' / COMICS OPTICS TEMP COMMENT = ' ------------------------- Detector bias,clock' Q_S1CHIP= 'IBC-105 ' / COMICS SPEC-POSITION-1 CHIP ID Q_S2CHIP= 'IBC-30388 ' / COMICS SPEC-POSITION-2 CHIP ID Q_S3CHIP= 'IBC-30814 ' / COMICS SPEC-POSITION-3 CHIP ID Q_S4CHIP= 'IBC-30394 ' / COMICS SPEC-POSITION-4 CHIP ID Q_S5CHIP= 'IBC-131 ' / COMICS SPEC-POSITION-5 CHIP ID Q_SPVSC = '-4.9963 ' / COMICS SPECTROSCOPY CHIP VSSCLK VOLTAGE Q_SPVSS = '-5.8230 ' / COMICS SPECTROSCOPY CHIP VSS VOLTAGE Q_SPBS0 = '-6.9131 ' / COMICS SPECTROSCOPY CHIP BIAS0 VOLTAGE Q_SPBS1 = '-7.0448 ' / COMICS SPECTROSCOPY CHIP BIAS1 VOLTAGE Q_SPBS2 = '-5.1132 ' / COMICS SPECTROSCOPY CHIP BIAS2 VOLTAGE Q_SPBS3 = '-3.8063 ' / COMICS SPECTROSCOPY CHIP BIAS3 VOLTAGE Q_SPBS4 = '-2.8033 ' / COMICS SPECTROSCOPY CHIP BIAS4 VOLTAGE Q_SPBS5 = '-3.5046 ' / COMICS SPECTROSCOPY CHIP BIAS5 VOLTAGE Q_SPBS6 = '-2.0001 ' / COMICS SPECTROSCOPY CHIP BIAS6 VOLTAGE Q_SPBS7 = '-6.0121 ' / COMICS SPECTROSCOPY CHIP BIAS7 VOLTAGE Q_SPBS8 = '-3.0010 ' / COMICS SPECTROSCOPY CHIP BIAS8 VOLTAGE Q_SPBS9 = '-4.1081 ' / COMICS SPECTROSCOPY CHIP BIAS9 VOLTAGE Q_SPCS00= '85.0 ' / COMICS SPECTROSCOPY CHIP CS00 CURRENT Q_SPCS02= '148.7 ' / COMICS SPECTROSCOPY CHIP CS02 CURRENT Q_SPCS03= '148.7 ' / COMICS SPECTROSCOPY CHIP CS03 CURRENT Q_SPCS10= '106.3 ' / COMICS SPECTROSCOPY CHIP CS10 CURRENT Q_SPCS12= '191.3 ' / COMICS SPECTROSCOPY CHIP CS12 CURRENT Q_SPCS13= '170.0 ' / COMICS SPECTROSCOPY CHIP CS13 CURRENT Q_SPCS20= '106.2 ' / COMICS SPECTROSCOPY CHIP CS20 CURRENT Q_SPCS22= '170.0 ' / COMICS SPECTROSCOPY CHIP CS22 CURRENT Q_SPCS23= '148.8 ' / COMICS SPECTROSCOPY CHIP CS23 CURRENT Q_SPCS30= '85.0 ' / COMICS SPECTROSCOPY CHIP CS30 CURRENT Q_SPCS32= '148.7 ' / COMICS SPECTROSCOPY CHIP CS32 CURRENT Q_SPCS33= '148.7 ' / COMICS SPECTROSCOPY CHIP CS33 CURRENT Q_SPCS40= '106.2 ' / COMICS SPECTROSCOPY CHIP CS40 CURRENT Q_SPCS42= '170.0 ' / COMICS SPECTROSCOPY CHIP CS42 CURRENT Q_SPCS43= '170.0 ' / COMICS SPECTROSCOPY CHIP CS43 CURRENT Q_DETST = '100000 ' / Detector Readout Status Q_CLKFL = '/home/comics/cbin/clk/clkgen/013/c030.00030.001.01' / Macro File Q_PIXTIM= 30 / Clock duration for a pixel (0.1us) Q_RRSTRT= 1 / Reset Row Start Width (ND) Q_CHWB = 2 / Wipe Exporsure Number in a Chop-beam Q_CHEB = 16 / Exporsure Number in a Chop-beam Q_CHCN = 22 / Chopping Number in this file Q_CHAM = 1 / Add Mode 0:RAW 1:ADD 2:ECO Q_CHOP = 1 / Chopping ON=1 OFF=0 Q_CTYPE = 0 / Clock Type 0-9 Q_YSTRT = 1 / Readout Region Y start Q_1EXP = 0.060 / Integration time per exp. (sec) = EXPTIME Q_1FRAME= 0.964 / Integration time per frame(co-added) (sec) COMMENT = ' ------------------------- CHOPPING' Q_CHTHRW= 10.00 / Chopping Throw Q_CHDEG = 358.99 / Chopping Degree COMMENT = ' ------------------------- FITS VERSION' Q_GETVER= '4.24 ' / FITS header VERSION END