### TEMPLATE OPE FILE FOR MOIRCS IMAGING MODE.
### PREPARED BY ICHI TANAKA
### Ver.20080420 -- AFTER CHIP-1 REPLACEMENT: USE NDUMMYREAD=2
<HEADER>
PROPOSALID=O080000
OBSERVATION_PERIOD=2008-04-30-18:30:00 - 2008-05-01-06:30:00
OBE_ID=MOIRCS
OBE_MODE=IMAG
</HEADER>

<PARAMETER_LIST>
### GROBAL SETTINGS
DEF_IMG=OBE_ID=MOIRCS OBE_MODE=IMAG
DEF_TOOL=OBE_ID=MOIRCS OBE_MODE=TOOL

##  FILTERS
DEF_IMY=FILTER_A=HOLE FILTER_B=CSL GRISM=Y
DEF_IMJ=FILTER_A=J FILTER_B=CSL GRISM=HOLE
DEF_IMH=FILTER_A=H FILTER_B=CSL GRISM=HOLE
DEF_IMKS=FILTER_A=KS FILTER_B=CSL GRISM=HOLE
DEF_IMKS_WD=FILTER_A=HOLE FILTER_B=CSL GRISM=KS_WD

DEF_IMH2=FILTER_A=H2 FILTER_B=CSL GRISM=HOLE
DEF_IMFE2=FILTER_A=FE2 FILTER_B=CSL GRISM=HOLE
DEF_IMNB119=FILTER_A=NB119 FILTER_B=CSL GRISM=HOLE
DEF_IMK_CONT=FILTER_A=K_CONT FILTER_B=CSL GRISM=HOLE

### OBJECT LIST
## TARGET 
#   <<< put your target information here >>>
ARP220=OBJECT=ARP220 RA=153457.100 DEC=233011.00 EQUINOX=2000.0 PA=0.0
M83=OBJECT="MESSIER 83" RA=133700.900 DEC=-295156.00 EQUINOX=2000.0 PA=0.0

## STANDARDS
#   <<< put your standard star information here >>>
# e.g. FS21  J=13.020 H=13.064 Ks=13.168 
FS21=OBJECT=FS21 RA=113705.15 DEC=+294758.4 EQUINOX=2000.0 PA=0.0


##  FOCUSING TARGETS
#   <<< Ask the SS for good clusters for your run.>>>
#   <<< Rich star clusters near your targets will be used.>>>

M3=OBJECT=MESSIER3 RA=134211.00 DEC=+282232.00 EQUINOX=2000.0 PA=0.0

</PARAMETER_LIST>


<COMMAND>
###############################################################
########### CALIBRATION PART ##################################
###############################################################

###########################
### DARK ##################
###########################
#   <<< USUALLY DARK CAN BE IGNORED, BUT FOR CHIP-1 DATA
#       DARK DATA UNDER THE SAME SETTING (EXPTIME,COADD,
#       PRD_SIZE) IS NECESSARY. DO NOT FORGET TAKING DARKS.>>>

SETUPOBE         $DEF_IMG GRISM=BP

GETOBJECT        $DEF_IMG OBJECT=DARK EXPTIME=21 NEXPOSURE=5 NDUMMYREAD=2 DATTYPE=DARK

GETOBJECT        $DEF_IMG OBJECT=DARK EXPTIME=50 COADDS=3 NEXPOSURE=5 NDUMMYREAD=2 DATTYPE=DARK

###########################
### DOME FLAT #############
###########################
#   <<< ASK THE SS FOR DOME FLAT ACQUISITION >>>

### Dome J band (24min + tuning time)  ###
## Bright Dome .... Use 10W with 3.0V.
##   .... Should be ~4000ADU (chip2) in 13 sec. Take 40 sec data.
## Faint Dome .... Use 10W with 1.7V. 
##   .... Should be 600-700ADU (chip2) in 13 sec. Take 40 sec data.

SETUPOBE         $DEF_IMG $DEF_IMJ
#   COUNTCHECK
CHECKFIELD       $DEF_IMG EXPTIME=13.0
#   BRIGHT DOME DATA (EXPTIME=60)
GETOBJECT        $DEF_IMG OBJECT=DOMEON DATTYPE=DOMEFLAT EXPTIME=40.0 NEXPOSURE=10 NDUMMYREAD=2
#   FAINT DOME DATA (EXPTIME=60)
GETOBJECT        $DEF_IMG OBJECT=DOMEOFF DATTYPE=DOMEFLAT EXPTIME=40.0 NEXPOSURE=10 NDUMMYREAD=2

### Dome H band (20min + tuning time)  ###
## Bright Dome .... Use 10W with 2.6V.
##   .... Should be ~7200ADU (chip2) in 13 sec. Take 30 sec data.
## Faint Dome .... Use 10W with 1.5V. 
##   .... Should be ~1100ADU (chip2) in 13 sec. Take 30 sec data.

SETUPOBE         $DEF_IMG $DEF_IMH
#   COUNTCHECK
CHECKFIELD       $DEF_IMG EXPTIME=13.0
#   BRIGHT DOME DATA (EXPTIME=30)
GETOBJECT        $DEF_IMG OBJECT=DOMEON DATTYPE=DOMEFLAT EXPTIME=30.0 NEXPOSURE=10 NDUMMYREAD=2
#   FAINT DOME DATA (EXPTIME=30)
GETOBJECT        $DEF_IMG OBJECT=DOMEOFF DATTYPE=DOMEFLAT EXPTIME=30.0 NEXPOSURE=10 NDUMMYREAD=2

### Dome Ks band  (26min + tuning time if N=15)  ###
## !!! Take in the morning time (cool dome surface required). !!!
#
## Take the "lamp-off dome" data first (>10 exposure, 21 sec).
## If the lamp-off count is already high (>12000ADU), take many more.
## If the count is too high (>15000ADU), taking dome may be difficult.
#
## Lamp-on Dome data .... Use 600W lamp with 6.5-8.5V (depending on
##                        the lamp-off count). >10 exposure 21 sec.

SETUPOBE         $DEF_IMG $DEF_IMKS
#   COUNTCHECK
CHECKFIELD       $DEF_IMG EXPTIME=13.0
#   DOME-OFF DATA 
GETOBJECT        $DEF_IMG OBJECT=DOMEOFF DATTYPE=DOMEFLAT EXPTIME=21.0 NEXPOSURE=15 NDUMMYREAD=2
#   DOME-ON DATA -- count should be kept to < 20000 ADU
GETOBJECT        $DEF_IMG OBJECT=DOMEON DATTYPE=DOMEFLAT EXPTIME=21.0 NEXPOSURE=15 NDUMMYREAD=2




###############################################################
########### OBSERVATION PART ##################################
###############################################################

###########################
### FOCUSING ##############
###########################
#   <<< Add your focusing target names on SETUPFIELD command >>>

SETUPFIELD       $DEF_IMG $DEF_IMKS $M3

#   START
FOCUSTELESCOPE   $DEF_TOOL EXPTIME=12.0 NDUMMYREAD=0 NSTEP=9 Z=0.20 DELTAZ=0.025 FOCUS_MODE=ANA


###########################
### DEEP IMAGING ##########
###########################
##  FIELD SELECTION
#   <<< Add your target names on SETUPFIELD command >>>

SETUPFIELD       $DEF_IMG $DEF_IMKS $ARP220 AUTOGUIDE=NO

#   FILTER CHEANGE
SETUPOBE         $DEF_IMG $DEF_IMH
SETUPOBE         $DEF_IMG $DEF_IMJ

#   FIELDCHECK
CHECKFIELD       $DEF_IMG EXPTIME=21 NDUMMYREAD=2 SKYSUB=YES
#   IF NECESSARY...
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO


##  TARGET OBSERVATION
#   <<< Edit the lines below according to your observing plan as you 
#   like.  The exposures given below are just the typical values under 
#   normal sky condition.  The acutal values will change each night/
#   time/airmass.  For details, see imag_obsguide_MOIRCS.pdf >>>

# <<< Change DITHLENGTH and DITHANGLE values arbitarily when you 
# repeat GETOBJECT command. That will eliminate the latent image 
# near bright stars.  >>>

#   J -- COADD 1
GETOBJECT        $DEF_IMG EXPTIME=120.0 NDUMMYREAD=2 COADDS=1 DITHNUM=8 DITHCENTER=YES DITHLENGTH=15.0 DITHANGLE=10.0 AUTOGUIDE=NO

#   H -- COADD 4
GETOBJECT        $DEF_IMG EXPTIME=30.0 NDUMMYREAD=2 COADDS=4 DITHNUM=8 DITHCENTER=YES DITHLENGTH=15.0 DITHANGLE=10.0 AUTOGUIDE=NO

#   KS -- COADD 3
GETOBJECT        $DEF_IMG EXPTIME=50.0 NDUMMYREAD=2 COADDS=3 DITHNUM=8 DITHCENTER=YES DITHLENGTH=15.0 DITHANGLE=10.0 AUTOGUIDE=NO

#

#   THE USE OF THE [SKYNOD OPTION] -- EXAMPLE
#   NODOFFSET_? DEFINES THE SKY POSITION FROM THE POINTING POSITION.
#   NODDITHLENGTH IS THE DITHER LENGTH ON SKY POSITION.


#   !! If you want to use this option, ask the SS for details !!

SETUPFIELD       $DEF_IMG $DEF_IMKS $M83 AUTOGUIDE=YES

#   FIELDCHECK
CHECKFIELD       $DEF_IMG EXPTIME=21 NDUMMYREAD=2 SKYSUB=YES DITHLENGTH=60 AUTOGUIDE=YES

#   !! KEEP DITHCENTER=NO !!
GETOBJECT        $DEF_IMG EXPTIME=50.0 NDUMMYREAD=2 COADDS=3 DITHNUM=9 DITHCENTER=NO DITHLENGTH=15.0 DITHANGLE=10.0 SKYNOD=YES NODOFFSET_X=600 NODOFFSET_Y=900 NODDITHANGLE=180 NODDITHLENGTH=50.0 AUTOGUIDE=YES


###########################
### STANDARD STARS ########
###########################
##  TARGETS
#   <<< Add your standard star names on SETUPFIELD command >>>
SETUPFIELD       $DEF_IMG $FS21

##  FILTERS
SETUPOBE         $DEF_IMG $DEF_IMKS
SETUPOBE         $DEF_IMG $DEF_IMH
SETUPOBE         $DEF_IMG $DEF_IMJ


##  OFFSETS
#   POINTING POSITION -> CHIP-2 CENTER
TELOFFSET        $DEF_TOOL DX=91.0 DY=3.8 AUTOGUIDE=NO
#   POINTING POSITION -> CHIP-1 CENTER
TELOFFSET        $DEF_TOOL DX=-81.5 DY=2.4 AUTOGUIDE=NO
#   CHIP-1 TO CHIP-2
TELOFFSET        $DEF_TOOL DX=178.2 DY=1.4 AUTOGUIDE=NO
#   CHIP-2 TO CHIP-1
TELOFFSET        $DEF_TOOL DX=-178.2 DY=-1.4 AUTOGUIDE=NO

#   FOR FURTHER CORRECTION
TELOFFSET        $DEF_TOOL DX=0.0 DY=0.0 AUTOGUIDE=NO

##  CHECK SATURATION -- PEAK SHOULD BE < 20000 ON CH2.
CHECKFIELD       $DEF_IMG EXPTIME=21.0 NDUMMYREAD=2
# PARTIAL READ: MINIMUM EXPOSURES FOR PRD_SIZE (+1.5sec recommended).
CHECKFIELD       $DEF_IMG EXPTIME=4.0 NDUMMYREAD=2 PRD_SIZE=512


##  DATA ACQUISITION 
##  EXAMPLE OF 2-POINT DITHER CASE
GETOBJECT        $DEF_IMG EXPTIME=21.0 NDUMMYREAD=2 DITHNUM=4 DITHCENTER=NO DITHLENGTH=60.0 DITHANGLE=45 DATTYPE=STANDARD_STAR
##  PARTIAL READ CASE
#  0.5k ... 2.011, 1k ... 5.943, 1.5k ... 11.844 (+1.5s recommended)
GETOBJECT        $DEF_IMG EXPTIME=5.0 PRD_SIZE=512 NDUMMYREAD=2 DITHNUM=4 DITHCENTER=NO DITHLENGTH=30.0 DITHANGLE=45 DATTYPE=STANDARD_STAR


</COMMAND>